All-thread Rod Anchoring Systems

Stainless Steel - Wood - For use in corrosive Environments

303 stainless caps; 18-8 stainless screw

SAMMYS®

WOOD • 1/4" Rod • Vertical Mount						#14 Item #100 PN 8113910
Use #14 Nut Driver (Item #100)
Item No	Model	Shank Length inches	Rod Size inches	Shank Diameter inches	Box Qty
4117	GST 300-SS	3	1/4-20	1/4	125

WOOD • 3/8" Rod • Vertical Mount											#14 Item #100 PN 8113910
Use #14 Nut Driver (Item #100)
	Item No	Part #	Model	Shank Length inches	Rod Size inches	Shank Diameter inches	UL Test Load (lb.)	UL Pipe Size inches	Actual Pullout	Box Qty
							Minimum Wood Thickness 1.5 inches
	1151	8068925	GST 20-SS *	2	3/8-16	1/4	850	2-1/2	1760# - Fir	125
	1155	8069925	GST 30-SS *	3	3/8-16	1/4	1500	4	2060# - Fir	125

* Contact ITW Buildex for availability and lead time

Click on symbol to link direct to UL Online Certification

SIDEWINDERS

WOOD • 3/8" Rod • Horizontal Mount										#14SW Item #101 PN 8114910
Use #14SW Nut Driver (Item #101)
	Item No	Model	Rod Size inches	Shank Diameter inches	Shank Length inches	Minimum Wood Thickness 1.5 inches		Actual Shear/Pullout	Box Qty
						UL Test Load lb.	UL Pipe Size inches
	301	SWG 20-SS*	3/8-16	1/4	2	850	2-1/2	1725# - Fir	125

Click on symbol to link direct to UL Online Certification

* Contact ITW Buildex for availability and lead time

Factory Mutual and UL listed approvals - pdf

Link to DOWNLOADS including: Product Catalog, engineering (CAD) drawings, list of FM approvals, ICC Evaluation Service, Miami Dade Online Certification and UL test reports.

VERTICAL MOUNT.pdf

HORIZONTAL MOUNT.pdf

Installation Diagrams

Composite Joist

Consult truss manufacturer for recommended installation point.

See Special Notes

Installation per NFPA 13

All installations must be performed with appropriate nut drivers to comply with warranty.

Installation Instructions

Wood Sammy (GST) • Wood Sidewinder (SWG)
Self drilling & self-tapping into wood

See Figures 1 - 4 (vertical) and 11 - 14 (horizontal) of detailed installation instructions for more diagrams and illustrations.

Step 1
Insert the appropriate nut driver into a 3/8" or ½" portable drill:

use #14 Nut Driver for GST for 3/8" and ¼" rod;
use #14SW Nut Driver for SWG, and for GST for ½" rod.

Step 2
Insert the screw into the nut driver. Now you are ready to install the screw.

Step 3
Position drill and begin installation:

for installing GST, drill should be in a vertical position;
for installing SWG drill should be in a horizontal position at a right angle to the structural member.

Step 4
When the nut driver spins freely on the cap of the screw installation is complete.

Step 5
Screw is now ready to receive ¼", 3/8", ½" or metric all thread rod or bolt stock.

• Must be installed with appropriate nut driver to comply with warranty.
• Eye protection should be worn at all times when installing this product.

Download CAD Drawings

Installation Instructions

Safety Information

Information: submit a request or contact, marketing@itwbuildex.com

Last modified: August 26, 2008 - An independent, non-profit content rating organization.

Copyright © 2002-2008: ITW Buildex. All trademarks or registered trademarks used are trademarks of Sammy Super Screw®, ITW Buildex and Illinois Tool Works, Inc. ITW Buildex Privacy Policy

ITW Buildex uses WebTrends Live to analyze traffic to this web site. WebTrends Live does not create individual profiles for visitors. Unlike some tracking services WebTrends Live does not have a database of individual profiles for each visitor. WebTrends Live only collects aggregate data. For more information about WebTrends Live privacy policy, please click here.

Send mail to: webmaster@itwbuildex.com with questions or comments about the webpage.