Home Up SS Wood SS Steel Sheetrock Hurricane Ceiling Screws Pole Tool Sammy Assortment Sammy Saddle Sammy Xpress Sammy Swivel Head Dektite Install Kit GST - Wood Sammy SWG - Wood SW DST - Steel Sammy SWDR - Steel SW CST - Concrete Sammy SWC - Concrete SW

All-thread Rod Anchoring Systems

Concrete Sidewinder - Self-tapping into concrete   

Requires pre-drilling of a ¼" hole.
Concrete • 3/8" Rod • Horizontal Mount
#14SW
Nut Driver
Item 101

PN  8114910

Use #14SW Nut Driver (Item #101)
Item No Part # Model Rod
Size		 FM Max Pipe Size FM Test Load lbs. Shk
Diameter		 Shk Length Actual
Shear/Pullout*
  65 8061957 SWC 20 3/8 - 16 4" 1475 5/16 1¾ 2050#
¼" bit (item #107) included with each box of 100-count concrete screws.

* Strength of Concrete - 4,100 psi.

Click on symbol to link direct to FM Global Loss Prevention Data Sheet 1-2.

Legend
Factory Mutal Approved
Box quantity 25. Standard box quantity 125, except where so indicated.

Factory Mutual and UL listed approvals - pdf

Link to DOWNLOADS including:   Product Catalog, engineering (CAD) drawings, list of FM approvals,  ICC Evaluation Service, Miami Dade Online Certification and UL test reports.

HORIZONTAL MOUNT.pdf

Installation Instructions

CST • SWC
Follow these steps to complete installation.
See also Figures 5 through 10 (vertical) and 15 through 20 (horizontal) of detailed installation instructions.
1. Using a SDS 250 carbide tip bit or a HEX RECEIVER with a #250 carbide tip bit, predrill the concrete member to a depth of 2" with an impact/drill set on impact mode.
2. After pre-drilling has been completed, install the SLEEVE TOOL over the bit (the bit should remain in the drill).
3. Insert the appropriate nut driver — #14 for CST, #14SW for SWC — into the opposite end.
4. Insert the concrete screw into the nut driver. Now you are ready to install the screw into the concrete member.
5. Place tip of screw into the pre-drilled hole, turn impact/drill unit to drill mode and begin insertion. When the nut driver spins free on the screw, installation is complete. Stop and remove drill.
6. The concrete screw is ready to receive ¼", 3/8", ½" or metric all thread rod or bolt stock.
Do not install concrete screws while the drill unit is in impact mode. Doing so will destroy the pullout factor of the fastener. Eye protection should be worn at all times when installing this product.
Download CAD Drawings Installation Instructions Safety Information

Home SS Wood SS Steel Sheetrock Hurricane Ceiling Screws Pole Tool Sammy Assortment Sammy Saddle Sammy Xpress Sammy Swivel Head Dektite Install Kit GST - Wood Sammy SWG - Wood SW DST - Steel Sammy SWDR - Steel SW CST - Concrete Sammy SWC - Concrete SW

Information: submit a request or contact,

Last modified: April 25, 2008         -   An independent, non-profit content rating organization.

Copyright © 2002-2008:   ITW Buildex. All trademarks or registered trademarks used are trademarks of Sammy Super Screw®, ITW Buildex and Illinois Tool Works, Inc.   ITW Buildex Privacy Policy

ITW Buildex uses WebTrends Live to analyze traffic to this web site.  WebTrends Live does not create individual profiles for visitors.  Unlike some tracking services WebTrends Live does not have a database of individual profiles for each visitor.  WebTrends Live only collects aggregate data.  For more information about WebTrends Live privacy policy, please click here.

Send mail to:    with questions or comments about the webpage.