Home Up SS Wood SS Steel Sheetrock Hurricane Ceiling Screws Pole Tool Sammy Assortment Sammy Saddle Sammy Xpress Sammy Swivel Head Dektite Install Kit GST - Wood Sammy SWG - Wood SW DST - Steel Sammy SWDR - Steel SW CST - Concrete Sammy SWC - Concrete SW

All-thread Rod Anchoring Systems

Wood Sammy - Self drilling & self-tapping into wood   

WOOD • 1/4" Rod • Vertical Mount
#14
Item #100

PN 8113910

Use #14 Nut Driver (Item #100)
Item
No		 Part # Model Rod
Size inches		 Shank Diameter inches Shank Length inches Box Qty
21 8002957 GST 100 1/4-20 1/4 1 125
22 8003957 GST 200 1/4-20 1/4 2 125
23 8004957 GST 300 1/4-20 1/4 3 125

 

WOOD • 3/8" Rod • Vertical Mount  
#14
Item #100

PN 8113910

Use #14 Nut Driver (Item #100)
  Item
No		 Part # Model Rod Size inches Shk
Diameter inches		 Shk
Length inches		 UL
Test
Load
(lb)		 UL Pipe Size inches FM
Test
Load
(lb)		 FM Pipe Size inches Actual
Pullout		 Box Qty
Minimum Wood Thickness 1.5 inches Minimum Wood Thickness 1.5 inches
  10 8006957 GST .75 3/8-16 ¼ ¾         564# - 6 Ply 125
11 8007957 GST 10 3/8-16 ¼ 1 300  CPVC 1-1/2     210# - 7/16 OSB
670# - ¾" Ply		 125
12 8008957 GST 20 3/8-16 ¼ 2 850 2½ 1475 4 1760# - Fir 125
27 8009925 GST 25-380 3/8-16 3/8 2½ 1500  4     2113# - Fir 125
30 8010957 GST 30 3/8-16 ¼ 3 1500 4 1475 4 2060# - Fir 125
  403 8011925 GST 40 3/8-16 ¼ 4         2180# - Fir 125
  14 8012925 GST 60 3/8-16 ¼ 6         2230# - Fir 125

 Click on symbol to link direct to UL Online Certification

Click on symbol to link direct to FM Global Loss Prevention Data Sheet 1-2.

WOOD • 1/2" Rod • Vertical Mount  Note: #14SW must be used
 for screws with ½" cap.
 
Use #14SW Nut Driver (Item #101)
Item
No		 Part # Model Rod
Size inches		 Shank Diameter inches Shank Length inches Actual
Pullout		 Box Qty
8 8013925 GST 2 ½ - 13 ¼ 2 1760# - Fir 125
06 8014925 GST 2.5-380 ½ - 13 3/8 2½ 2113# - Fir 125
#14SW
Item #101

PN  8114910

15 8015925 GST 3 ½ - 13 ¼ 3 2275# - Fir 125
16 8016925 GST 4 * ½ - 13 ¼ 4 2180# - Fir 125
17 8017925 GST 6 * ½ - 13 ¼ 6 2230# - Fir 125

* Contact ITW Buildex for availability and lead time

Legend
Factory Mutal Approved
UL-listed
Box quantity 25. Standard box quantity 125, except where so indicated.

Factory Mutual and UL listed approvals - pdf

Link to DOWNLOADS including:   Product Catalog, engineering (CAD) drawings, list of FM approvals,  ICC Evaluation Service, Miami Dade Online Certification and UL test reports.

VERTICAL MOUNT.pdf

Installation Diagrams
Composite Joist

Consult truss manufacturer for recommended installation point.

See Special Notes
Installation per NFPA 13
All installations must be performed with appropriate nut drivers to comply with warranty.
Installation Instructions
Wood Sammy (GST) • Wood Sidewinder (SWG)
Self drilling & self-tapping into wood
See Figures 1 - 4 (vertical) and 11 - 14 (horizontal) of detailed installation instructions for more diagrams and illustrations.

Step 1
Insert the appropriate nut driver into a 3/8" or ½" portable drill:

  1. use #14 Nut Driver for GST for 3/8" and ¼" rod;
  2. use #14SW Nut Driver for SWG, and for GST for ½" rod.

Step 2
Insert the screw into the nut driver. Now you are ready to install the screw.

   Step 3
Position drill and begin installation:
  1. for installing GST, drill should be in a vertical position;
  2. for installing SWG drill should be in a horizontal position at a right angle to the structural member.

Step 4
When the nut driver spins freely on the cap of the screw installation is complete.

Step 5
Screw is now ready to receive ¼", 3/8", ½" or metric all thread rod or bolt stock.

  • Must be installed with appropriate nut driver to comply with warranty.
• Eye protection should be worn at all times when installing this product.
Download CAD Drawings Installation Instructions Safety Information

Home SS Wood SS Steel Sheetrock Hurricane Ceiling Screws Pole Tool Sammy Assortment Sammy Saddle Sammy Xpress Sammy Swivel Head Dektite Install Kit GST - Wood Sammy SWG - Wood SW DST - Steel Sammy SWDR - Steel SW CST - Concrete Sammy SWC - Concrete SW

Information: submit a request or contact,

Last modified: April 25, 2008         -   An independent, non-profit content rating organization.

Copyright © 2002-2008:   ITW Buildex. All trademarks or registered trademarks used are trademarks of Sammy Super Screw®, ITW Buildex and Illinois Tool Works, Inc.   ITW Buildex Privacy Policy

ITW Buildex uses WebTrends Live to analyze traffic to this web site.  WebTrends Live does not create individual profiles for visitors.  Unlike some tracking services WebTrends Live does not have a database of individual profiles for each visitor.  WebTrends Live only collects aggregate data.  For more information about WebTrends Live privacy policy, please click here.

Send mail to:    with questions or comments about the webpage.